HTTPS with Caddy
Introduction
We show how to set HTTPS with Caddy for any deployment on the grid.
Prerequisites
- A deployment on the TFGrid and SSH access
Set HTTPS
We set HTTPS with Caddy.
- Install Caddy
apt install -y debian-keyring debian-archive-keyring apt-transport-https curl curl -1sLf 'https://dl.cloudsmith.io/public/caddy/stable/gpg.key' | gpg --dearmor -o /usr/share/keyrings/caddy-stable-archive-keyring.gpg curl -1sLf 'https://dl.cloudsmith.io/public/caddy/stable/debian.deb.txt' > /etc/apt/sources.list.d/caddy-stable.list apt update apt install caddy
- Set a reverse proxy on port 80 with your own domain
caddy reverse-proxy -r --from example.com --to :80
You should see in the logs that it successfully obtains an SSL certificate, and after that you can try navigating to your site's domain again to verify it's working. Using a private window or adding https://
specifically might be necessary until your browser drops its cache.
When you're satisfied that everything looks good, hit ctl-c
to exit Caddy and we'll proceed to making this persistent.
Adjust the Firewall
To use Caddy and set HTTPS, we want to allow port 443. If you are using ufw
, add the permission for HTTPS:
- Add the permissions
-
ufw allow 443
-
Manage with zinit
We manage Caddy with zinit.
- Open the file for editing
nano /etc/zinit/caddy.yaml
- Insert the following line with your own domain and save the file
exec: caddy reverse-proxy -r --from example.com --to :80
- Add the new Caddy file to zinit
zinit monitor caddy
Zinit will start up Caddy immediately, restart it if it ever crashes, and start it up automatically after any reboots. Assuming you tested the Caddy invocation above and used the same form here, that should be all there is to it.
Here are some other Zinit commands that could be helpful to troubleshoot issues:
- See status of all services (same as "zinit list")
zinit
- Get logs for a service
zinit log caddy
- Restart a service (to test configuration changes, for example)
zinit stop caddy zinit start caddy
Questions and Feedback
If you have any questions or feedback, please let us know by either writing a post on the ThreeFold Forum, or by chatting with us on the TF Grid Tester Community Telegram channel.